product category
LIFT-O-MAT
LIFT-O-MAT-DD
LIFT-OMT JAPAN SPEC.
INOX LINE
LIFT-O-MAT With Safety Tube
LIFT-O-MAT with Metal Tube
INOX LINE-Safety Tube
LIFT-O-MAT-Gas Damper
LIFT-O-MAT--PTL
Tension Spring
STAB-O-SHOC
BLOK-O-LIFT-BOL
BLOC-O-LIFT-T
BLOC-O-LIFT-OBT
BOL- Accessories
Vehicle Spare Parts
Connecting Parts
Ball Studs
Brackets
New Products
Industrial Powerise
Furniture-gas spring
Extra Accessory
Video
special fearures
contact infomation
聯絡信箱
聯絡電話、傳真
  • Languages
Products │  │  │  │ B10-0818 Socket (Plastic)(Hole 10mm)Select Spec.
大產品圖 線稿


Unit
:mm
9.8 Newton(N)=1 Kg=2.2 LBS  

THE FOLLOWING SPECIFICATION ARE GERMANY STANDARD SIZE. 

Model No. Stroke
(A)
Extended
Length(B)
Force
Range(N)
Remark
SB2-205-B10-XXXN   60 205 100~700N  
SB2-245-B10-XXXN   80 245 100~700N  
SB2-285-B10-XXXN 100 285 100~700N  
SB2-295-B10-XXXN 100 295 100~700N
SB2-325-B10-XXXN 120 325 100~700N  
SB2-330-B10-XXXN 125 330 100~700N  
SB2-365-B10-XXXN 140 365 100~700N  
SB2-375-B10-XXXN 148 375 100~700N  
SB2-405-B10-XXXN 165 405 100~700N  
SB2-430-B10-XXXN 177 430 100~700N  
SB2-445-B10-XXXN 180 445 100~700N  
SB2-450-B10-XXXN 185 450 100~700N  
SB2-485-B10-XXXN 200 485 100~700N  
SB2-500-B10-XXXN 210 500 100~700N  
SB2-525-B10-XXXN 225 525 100~700N  
SB2-585-B10-XXXN 250 585 100~700N  
SB2-630-B10-XXXN 275 630 100~700N  

  

Specification:

Rod Dia.: 8 mm
Tube Dia.: 18 mm
Rod Surface treatment : Nitrided Black
Tube Surface treatment : Black Coated


※ When you  making enquiry ,please advise us the  F1(Newton) force request.
    Other size also available ,Please contact us for further information.

 

SUPERSEN-Gas Spring Free Series
Lifting, lowering, moving, adjusting

The gas spring can be designed with an approximately linear, progressive or degressive spring rate curve, to match the special request.
The characteristic curve of the spring describes the progression of the force of the gas spring over the stroke, from the extended to the compressed state and vice versa.


If the spring rate is flat and progresses in a practically linear manner, the force of the gas spring rises only slightly over the entire spring operation.
Spring rate: X=F2:F1


The force diagram on the left shows the line of the extension and compression force with a flat spring rate. The difference between the two lines is the result of the system friction produced during compression and extension.


The measuring points F1 and F4 are each located 5~10 mm before the fully extended and compressed stroke. The measurements were conducted at a temperature of 25℃±3℃.